Global Energy Savers
Plug-in Model ES120: The ES120 plugs directly into any electrical outlet (120 volt) and conditions every electrical device plugged into that circuit. In other words, the electronics and appliances on that circuit will run cooler, smoother and last longer. The ES120 provides powerful surge protection, voltage regulation, power factor correction, EMF and electrical noise reduction, and equipment protection and longevity.* We have included a convenient outlet on the front so that no outlet space is lost. Common places to plug in this unit are: Kitchen, Home Office, Entertainment Center, Living Room.Learn how two plug-in units can protect your entire house!
Plug-in Model ES240: This unit is designed specifically for 240V equipment and appliances, such as window-mount and portable air conditioners.
Wire-in Model ES1PN: The ES1PN is a single phase with neutral unit designed to wire to your home breaker panel. In laymen's terms, this unit protects your whole house and everything plugged into it! A licensed electrician is required to install the ES1PN at your breaker panel; this generally takes around 15-20 minutes. The electricity from your power company does not flow through the unit because it is wired in 'parallel', allowing it to condition all the power while staying small and compact - a truly efficient design.
Wire-in Model ES1PP: The ES1PP wires directly to a single phase motor, such as a pool or hot tub, allowing it to work more efficiently and run smoother, cooler and last longer. (Residential is usually single phase.)
Wire-in Model ES3PN: The ES3PN is designed for wiring to the breaker box in commercial applications. This unit will condition and protect electronic devices and motors on three phase breakers. (Commercial is usually three phase.) The ES3PN is often combined with an ES3PP unit. Large residential homes may need the ES3PN instead of the ES1PN.
Wire-in Model ES3PP: The ES3PP wires directly to three phase motors, such as commercial equipment, air conditioners, etc., allowing them to work more efficiently and run smoother, cooler and last longer.
*Visit our Technology page for a more thorough explanation of these terms and how our units work.
|ES120 -||120V plug-in unit|
|ES240 -||240V plug-in unit|
|ES1PN -||120V-240V wire-in 1 Phase-Phase/Neutral Unit (1Ø Panel, A/C Saver/Aqua Saver)|
|ES1PP-||120V-240V wire-in 1 Phase-Phase/Phase Unit (1Ø A/C Saver/Aqua Saver)|
|ES3PN -||208V-240V wire-in 3 Phase-Phase/Neutral Unit (3Ø Panel)|
|ES3PP -||208V-240V wire-in 3 Phase-Phase/Phase Unit (3Ø A/C Saver/Aqua Saver)|
|ES501 -||105µf wire-in 3 Phase-Phase/Phase Unit (3Ø Panel, three 480V 35µf Caps, 1 per leg)|
|ES502 -||210µf wire-in 3 Phase-Phase/Phase Unit (3Ø Panel, three 480V 70µf Caps, 1 per leg)|
|ES504 -||410µf wire-in 3 Phase-Phase/Phase Unit (3Ø Panel, six 480V 70µf Caps, 2 "perfectly matched" per leg)|
Satic Fridge Demo
Residential homes are wired in single-phase electric power which is then divided into Phase A and Phase B. The circuits follow the pattern A, B, A, B (see illustration). These will be labeled for specific rooms or appliances in your house in case you "pop a breaker" and need to flip the switch to turn the power back on. If your microwave is on a breaker labeled Phase B and your guest bedroom is on a Phase A breaker - simply plug one unit into the same outlet as your microwave and one unit into an outlet in the guest room. As long as there is one unit on each of these split phases, your whole house will be covered!
Plug-in Global Energy Saver
Satic Energy Saving Bulbs
For More information on Satic Lamps
Click Here - PDF format
Call for Pricing
Wire-in Global Energy Saver